 |
| Volquartsen |
| Volquartsen Custom 10/22 Parts. Many prices reduced from 01/09/04. |
|
|
Volquartsen Trigger Guard 2000 £175
A complete trigger guard CNC machined from a solid billet of high strength aircraft grade aluminium, equipped with precision EDM parts with tolerances held to +/-.0002" assuring consistent trigger let off.
Features an internal spring to reset trigger, and black anodised trigger blade with overtravel adjustment screw. The unit is complete with custom springs, and extended magazine release and automatic bolt release in black or silver [ Top ] |
|
|
Hammer £32.00
A simple drop in kit which will decrease your trigger pull to around half the factory pressure, which usually runs at around 5-7lbs. In our view this is the first thing to do to your 10/22 if you are on a tight budget! The kit comprises a new hammer, plus hammer shims, plus replacement hammer and trigger plunger springs. [ Top ] |
|
|
Automatic bolt release £10.00
Pictured top left, this invaluable part saves all that fiddling around when trying to release the bolt after it has been locked back. Use it to lock back the bolt in the usual way, then just ease the bolt handle back and let it go. The bolt will run forward and chamber the next round. Silver or black. [ Top ] |
|
|
Extended magazine release £17.00
A drop in replacement for the flush mounted factory item. Simply press the lever forward and out drops the mag! Silver or black. [ Top ] |
|
|
Volquartsen High Performance Kit £100.00
A quality drop in kit designed to give a Match trigger pull without gunsmithing. Complete kit includes target hammer with sear, disconnector, trigger blade with overtravel screw, trigger plunger with improved radius-all with a special electroless nickel plated, special hammer and trigger plunger springs, and hammer shims, together with a vibration dampening bolt stop pin. [ Top ] |
|
|
Volquartsen High Performance Kit plus £120.00
This kit contains all the same parts as the High performance Kit, together with an extended magazine release and automatic bolt release, available in black or silver finish.
[ Top ] |
|
|
Recoil buffer £10.00
This little device simply replaces the steel recoil stop pin with a urethane covered pin. This prevents metal to metal contact between the bolt and its pin during recoil. It also reduces the sound of the action operating. [ Top ] |
|
 |
Competition Bolt Assembly £175
The CNC machined steel bolt is suitable for the Ruger 10/22 factory receiver as well as the Volquartsen Superlite receiver. Features include EDM hardened extractor for positive, consistent extraction, unique round titanium firing pin, and interchangeable bolt handles. Available with either compact stainless steel handle or target knob. Complete with recoil rod and spring. [ Top ] |
|
|
Bedding Kit £17.00
A simple to install kit as used by Volquartsen Custom on their 10/22 rifles. Supplied with easy to follow instructions, the kit includes a modified drill bit, aluminium bedding block and two pieces of self adhesive bedding material. [ Top ] |
|
|
Muzzle Brake £50.00
Turned from light weight aluminium, and available in black or silver, this muzzle brake will clamp directly to most .920" barrels.
UNF thread adaptor £9.00
A simple adapter which will screw onto any standard UNF thread, allowing the muzzle brake to be used on factory screwcut barrels.
Save money...buy the muzzle brake with UNF adapter for £55.00. [ Top ] |
|
|
Cleaning kit £9.00
The simple, safe way to clean a 10/22 barrel! Recommended for any barrel, but Volquartsen specify it as the ONLY way to clean their Match barrels! A simple "pull through" allows you to clean the barrel from the breech end. [ Top ] |
|
|
Scope Base £25.00
This base fits directly to the factory drilled and tapped holes on the top of the receiver, providing a high base for any weaver style scope rings. Available in black or silver finish.
[ Top ] |
|
|
EDM Extractor £11.00
An improved extractor for the 10/22.
Machined from hardened steel with a deep, sharp claw. This small part has proved very successful in improving extraction with low velocity and subsonic ammunition. Supplied with a replacement spring. [ Top ] |
|
|
Extended safety £10.00
Available for left or right handed operation. Installation of this part may require slight alterations to your stock. [ Top ] |
|
Return to top of page
|
|
|
